Differences

This shows you the differences between two versions of the page.

--- using_zero_with_ssd1306_based_lcd_and_spi [2026/08/25 17:33] – [Introduction] walkeradmin
+++ using_zero_with_ssd1306_based_lcd_and_spi [2026/08/25 18:23] (current) – [Test Code] walkeradmin
@@ Line 43: / Line 43: @@
 \\
 \\
-{{ :waveshare-sp-lcd-wiring.png?800 |}}
+{{ :waveshare-sp-lcd-wiring.png?700 |}}
+\\
+Once you have wired up your LCD, we can move on to the software.
+\\
+\\
+----
+==== The Driver ====
+\\
+You can download the driver here: {{ :ssd_1306_zero.zip |}} you have to upload the driver to the \lib folder.
+\\
+\\
+I am not going to talk about the driver because there isn't anything in there we need to change.
+\\
+\\
+----
+==== Test Code ====
+\\
+All this test code does is to print 8 lines of text with sequential numbers after them, the numbers keep incrementing one at a time. The test code is designed to ensure the LCD is working fine, not to provide any real functionality, that will be up to you once you get your LCD working.
+\\
+\\
 \\