Differences

This shows you the differences between two versions of the page.

--- pico_wifi_analyzer_-_phase_1 [2026/08/25 15:00] – [Introduction] walkeradmin
+++ pico_wifi_analyzer_-_phase_1 [2026/08/25 23:26] (current) – [Introduction] walkeradmin
@@ Line 9: / Line 9: @@
 ===== Introduction =====
 \\
 There is a lot of information on this Wiki about how to build this project, but don't be fooled, it's a very simple project, and it will take you longer to read the Wiki than it will to build the project :)
 \\
 \\
-The project consists of a Raspberry Pi Pico, an LCD Screen, 4 Wires and a pre-written Python script, very simple. The  hardest part of this project will probably be getting a compatible LCD, if you look on Aliexpress, there are hundreds of these LCDs and they cost between £2-£3 each. Buy two in case you break one :)
+<color #ed1c24>I recommend you read all the wiki pages for this project first so you don't miss something important or order some parts that will not work.</color>
+\\
+\\
+The project consists of a Raspberry Pi Pico, an LCD Screen, 4 Wires and a pre-written Python script, very simple. The  hardest part of this project will probably be getting a compatible LCD, if you look on Aliexpress, there are hundreds of these LCDs and they cost between £2-£3 each. Buy two in case you break one :) The LCD I have used is I2C, this is important because the Driver file and the running software are all setup to use I2C.
 \\
 \\