Aug 2026

There is a lot of information on this Wiki about how to build this project, but don't be fooled, it's a very simple project, and it will take you longer to read the Wiki than it will to build the project :)

The project consists of a Raspberry Pi Pico, an LCD Screen, 4 Wires and a pre-written Python script, very simple.

Before starting this project you must complete the following four tasks, that are on this Wiki, but I will link you them, and they are:

• Using Pico with SSD1306 based I2C LCD - This will show you the wiring for the LCD, and how to do a quick test.
• Connect Pico to Wifi - This is a must, you have to have Wifi connectivity, this will let you test this.
• Find Pico MAC Address - You don't need this unless your router uses MAC Address Filtering.
• Check Device I2C Address - You need the I2C address from your LCD to put in to the Python script.

• Using Pico with SSD1306 based LCD
  
• Connect Pico to Wifi
  
• Find Pico MAC Address
  
• Check Device I2C Address