The Software Build and Test

I want this page to contain the Software for the Clock, and for some test patterns, for now here is the code for the clock (remember, this code is for Common Anode displays)

This code originated from the following website (although I am pretty sure that is not the original source)
http://raspi.tv/2015/how-to-drive-a-7-segment-display-directly-on-raspberry-pi-in-python
This code was then modified by myself and a couple of friends (thanks to Malc and Chewie) to account for a couple of changes, and these are:

My 7 Segment LED is Common Anode, the original code is for common cathode.

My 7 Segment LED has a time separator and full stops (so is 8 segments) the original does not.

import RPi.GPIO as GPIO
import time
GPIO.setmode(GPIO.BCM)
# GPIO pins used to display 7 segments
gpioSegments = (5,6,13,19,26,21,20,16)
for segment in gpioSegments:
GPIO.setup(segment, GPIO.OUT)
GPIO.output(segment, 1)
# GPIO pins used to select digit 0-3
gpioDigits = (18,23,24,25)
for digit in gpioDigits:
GPIO.setup(digit, GPIO.OUT)
GPIO.output(digit, 0)
dotted=False
numbers = {'0':(0,0,1,0,1,0,0,0),
'1':(1,1,1,0,1,0,1,1),
'2':(0,0,1,1,0,0,1,0),
'3':(1,0,1,0,0,0,1,0),
'4':(1,1,1,0,0,0,0,1),
'5':(1,0,1,0,0,1,0,0),
'6':(0,0,1,0,0,1,0,0),
'7':(1,1,1,0,1,0,1,0),
'8':(0,0,1,0,0,0,0,0),
'9':(1,0,1,0,0,0,0,0),
' ':(0,0,0,0,0,0,0,0)}
try:
while True:
n = time.ctime()[11:13]+time.ctime()[14:16]
s = str(n).rjust(4)
for digit in range(4):
for loop in range(0,8):
GPIO.output(gpioSegments[loop], numbers[s[digit]][loop])
#if (int(time.ctime()[18:19])%2 == 0) and (digit == 2):
# GPIO.output(23, 0)
#else:
# GPIO.output(23, 1)
GPIO.output(gpioDigits[digit], 1)
time.sleep(0.005)
GPIO.output(gpioDigits[digit], 0)
finally:
GPIO.cleanup()

- - Ordered List Item