WalkerWiki - wiki.alanwalker.uk

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Show Gateway Address ======
<color darkorange>2016</color>
\\ 
\\ 
\\ 
To show the gateway address in Linux, we can use the <color red>route - nee</color> command.
\\ 
<file>
route -nee


Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface    MSS   Window irtt
192.168.27.0    0.0.0.0         255.255.255.0   U     0      0        0 eth0     0     0      0
169.254.0.0     0.0.0.0         255.255.0.0     U     1002   0        0 eth2     0     0      0
169.254.0.0     0.0.0.0         255.255.0.0     U     1003   0        0 eth3     0     0      0
169.254.0.0     0.0.0.0         255.255.0.0     U     1004   0        0 eth4     0     0      0
169.254.0.0     0.0.0.0         255.255.0.0     U     1005   0        0 eth5     0     0      0
169.254.0.0     0.0.0.0         255.255.0.0     U     1006   0        0 eth0     0     0      0
169.254.0.0     0.0.0.0         255.255.0.0     U     1007   0        0 eth1     0     0      0
10.0.0.0        0.0.0.0         255.0.0.0       U     0      0        0 eth2     0     0      0
10.0.0.0        0.0.0.0         255.0.0.0       U     0      0        0 eth3     0     0      0
11.0.0.0        0.0.0.0         255.0.0.0       U     0      0        0 eth4     0     0      0
11.0.0.0        0.0.0.0         255.0.0.0       U     0      0        0 eth5     0     0      0
0.0.0.0         192.168.27.254  0.0.0.0         UG    0      0        0 eth0     0     0      0

</file>
\\ 
\\ 
On a Raspberry Pi:
\\ 
<file>
route -nee


Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface    MSS   Window irtt
0.0.0.0         192.168.1.1     0.0.0.0         UG    202    0        0 eth0     0     0      0
192.168.1.0     0.0.0.0         255.255.255.0   U     202    0        0 eth0     0     0      0

</file>
\\ 
\\