WalkerWiki - wiki.alanwalker.uk

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Show Configured Input Services ======
<color #db5f0b>Jun 2017</color>
\\ 
\\ 

----
To display configured Input services, use the following command (after mondo halodb)
\\ 
\\ 
    db.input.find()
\\ 
The output will look similar to:
\\ 
<file>
{ "_id" : ObjectId("594102c7818fca0ed83551da"), "public_id" : "service1", "name" : "Service1", "created_at" : ISODate("2017-06-14T09:32:55.262Z"), "updated_at" : ISODate("2017-06-14T09:32:57.525Z"), "version" : "1.9.0", "gop_signaling" : "EBP", "gop_duration" : 2000, "sources" : [ { "port" : 10001, "address" : "239.0.200.1" }, { "port" : 10002, "address" : "239.0.200.1" }, { "port" : 10003, "address" : "239.0.200.1" }, { "port" : 10004, "address" : "239.0.200.1" } ], "multicast_sources" : [ ], "created_by_dvr" : false }
{ "_id" : ObjectId("59413043818fca5a01232e8c"), "public_id" : "service2", "name" : "Service2", "created_at" : ISODate("2017-06-14T12:46:59.451Z"), "updated_at" : ISODate("2017-06-14T12:46:59.451Z"), "version" : "1.9.0", "gop_signaling" : "EBP", "gop_duration" : 2000, "sources" : [ { "port" : 10001, "address" : "239.0.200.1" }, { "port" : 10002, "address" : "239.0.200.1" }, { "port" : 10003, "address" : "239.0.200.1" }, { "port" : 10004, "address" : "239.0.200.1" } ], "multicast_sources" : [ ], "created_by_dvr" : false }
</file>
\\ 
The unit I ran this command on had two configured services, Service1 and Service2. 
\\ 
\\ 
<file>
The main information we can see from each section is:

"public_id" : "service1", "name" : "Service1", "created_at" : ISODate("2017-06-14T09:32:55.262Z"),
"gop_signaling" : "EBP", "gop_duration" : 2000, "sources" 
"port" : 10001, "address" : "239.0.200.1" }
"port" : 10002, "address" : "239.0.200.1" }
"port" : 10003, "address" : "239.0.200.1" }
"port" : 10004, "address" : "239.0.200.1" }
</file>
\\ 
\\