WalkerWiki - wiki.alanwalker.uk

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== List CPU ======
<color darkorange>Jan 2018</color>
\\ 
\\ 

----
I am unsure if lscpu is installed by default, on the servers I have used so far it always seems to be there (even on my Raspberry Pi's). 
\\ 
To list the CPU(s) fitted to a Linux server, use the following:
\\ 
    lscpu
\\ 
Here is the output from a server:
<file>
Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                48
On-line CPU(s) list:   0-47
Thread(s) per core:    2
Core(s) per socket:    12
Socket(s):             2
NUMA node(s):          2
Vendor ID:             GenuineIntel
CPU family:            6
Model:                 63
Stepping:              2
CPU MHz:               2501.000
BogoMIPS:              4988.08
Virtualization:        VT-x
L1d cache:             32K
L1i cache:             32K
L2 cache:              256K
L3 cache:              30720K
NUMA node0 CPU(s):     0-11,24-35
NUMA node1 CPU(s):     12-23,36-47
</file>
\\ 
\\ 
Here is what it looks like on a Raspberry Pi v3
\\ 
<file>
Architecture:          armv7l
Byte Order:            Little Endian
CPU(s):                4
On-line CPU(s) list:   0-3
Thread(s) per core:    1
Core(s) per socket:    4
Socket(s):             1
Model name:            ARMv7 Processor rev 4 (v7l)
CPU max MHz:           1200.0000
CPU min MHz:           600.0000
</file>
\\ 
\\