Differences

This shows you the differences between two versions of the page.

--- wiki:interface_team_or_bond_with_nmtui [2022/02/21 19:48] – [nmtui] walkeradmin
+++ wiki:interface_team_or_bond_with_nmtui [2022/02/21 20:08] (current) – [nmtui] walkeradmin
@@ Line 29: / Line 29: @@
 \\
 The nmtui interface is a text based UI, so it runs very well from the command line (no Desktop GUI required). When nmtui first runs you will see this menu:
+\\
 \\
 {{ :wiki:nmtui_001.png?300 |}}
-Select <color #ed1c24><Edit a connection></color>.
+Select <color #ed1c24>Edit a connection</color>.
 \\
 \\
 The next menu shows you a list of the current interfaces
+\\
+\\
+{{ :wiki:nmtui_002.png?300 |}}
+\\
+Using the cursor keys, move over the right and select <color #ed1c24><Add></color>
+\\
+\\
+From the New Connection option menu
+\\
+\\
+{{ :wiki:nmtui_003.png?400 |}}
+\\
+Select either <color #ed1c24>Bond</color> or <color #ed1c24>Team</color>.
+\\
+\\
+Add a profile name to identify your bond/team
+\\
+\\
+{{ :wiki:nmtui_004.png?400 |}}
+\\
+Here I have used <color #ed1c24>bond0</color>
+\\
+\\
+Now click <color #ed1c24><Add></color> to the right of the Slaves box.
+\\
+\\
+{{ :wiki:nmtui_005.png?400 |}}
+\\
+A New Connection window will open and for this example (and probably most examples) we will use the <color #ed1c24>Ethernet</color> option.
+\\
+\\
+When the next window opens, you can specify your interface name.
+\\
+\\
+{{ :wiki:nmtui_006.png?400 |}}
+\\
+Enter the name of your fist interface in your bond/team then select <color #ed1c24><OK></color>
+\\
+\\
+You will now see the interface you just selected in the Slaves box. Repeat this process to add the second interface in your bond/team.
+\\
+\\
+Now both interfaces are added as slaves.
+\\
+\\
+{{ :wiki:nmtui_008.png?400 |}}
+\\
+(while in this example one interface is a master and the other a slave, both the interfaces are slaves in the bond).
+\\
+\\
+Lastly we have to add all of the static IP information to the bond/team.
+\\
+\\
+{{ :wiki:nmtui_009.png?400 |}}
+\\
+Below the slaves box, we need to select the <color #ed1c24>Mode</color> there are many modes, but for this example I am using <color #ed1c24>Active Backup</color>, so only one interface is active at any time. Below this setting, enter the name of the <color #ed1c24>Primary</color> interface (enp2s0 in this example).
+\\
+\\
+Now enter the IP information for the bond.
+    Address
+    Gateway
+    DNS Servers
+Once complete, select <color #ed1c24><OK></color>
+\\
+\\
+You will be back at the original menu page
+\\
+\\
+{{ :wiki:nmtui_010.png?300 |}}
+\\
+Select <color #ed1c24>Quit</color> and either restart the network or reboot the server.
+\\
+\\
-Using the cursor keys, move over the right and select <Add>