Differences

This shows you the differences between two versions of the page.

--- simple_linux_ts_streamer [2020/10/13 05:58] – created walkeradmin
+++ simple_linux_ts_streamer [2020/10/13 07:53] (current) – walkeradmin
@@ Line 1: / Line 1: @@
+====== Simple Linux TS Streamer ======
+<color darkorange>Oct 2020</color>
+\\
+\\
+----
+This Simple Linux TS Streamer allows the streaming of SPTS or MPTS files using just a simple CentOS/Redhat OS.
-Simple Linux TS Streamer
+{{ :openstack_k8s_ott_allinone_1-streamer-1.00.00.007-rc4.tar.gz |TS_Streamer_file}}
+Copy the above file to your CentOS VM – extract it and navigate to openstack……./mpeg2tsbroacaster/ folder. (/opt/streamer/bin by default)
+In there run the following command:
+    nohup sudo ./mpeg2ts_broadcaster 10.132.0.7 239.1.1.1 1234 0 ~/temp/F3720p.ts &
+Where:\\
+.132.0.7 -> is the IP address of the interface you want to stream from\\
+.1.1.1 -> multicast you want it come out on\\
+-> Port\\
+-> To loop forever\\
+~/temp/F3720p.ts -> Path to your ts file to use\\
+\\
+\\
+If you wrap the nohup and & around it, you can then disconnect and leave it running.
+\\
+\\
+To kill it:\\
+Sudo ps aux | grep mpeg2\\
+You will see it running as a process – just need to kill it: sudo kill -9 processid\\