Differences

This shows you the differences between two versions of the page.

--- route_command [2017/01/12 20:17] – walkeradmin
+++ route_command [2023/03/09 22:46] (current) – walkeradmin
@@ Line 1: / Line 1: @@
-====== Route Command ======
+====== Route Command (now ip route) ======
-<color darkorange>2016</color>
+<color darkorange>2016 - updated Jun 2017</color>
 \\
 \\
+---
+The <color #ed1c24>route</color> command has now been replaced. The command was deprecated some time ago, but continued to be used. The replacement is part of the <color #ed1c24>IP</color> command set.
+\\
+\\
+Pre CentOS 7 you can still use route, but as of v7 the IP command should be used.
+\\
+\\
+    ip route
+    default via 192.168.27.254 dev enp4s0f0  proto static  metric 100
+.0.0.0/8 dev ens513f0  proto kernel  scope link  src 10.0.222.2  metric 100
+.0.0.0/8 dev ens513f2  proto kernel  scope link  src 11.0.222.4  metric 100
+.168.27.0/24 dev enp4s0f0  proto kernel  scope link  src 192.168.27.222  metric 100
+\\
+\\
+---
 \\
 The <color red>route</color> command allows dynamic setting of a route from the command line, however using <color red>route</color> without any parameters will show the currently configured routes.
@@ Line 45: / Line 62: @@
 \\
 \\
+testing...