Differences

This shows you the differences between two versions of the page.

--- pico_with_rfid-rcs522 [2026/08/26 20:41] – [A Quick Note About RFID Tags] walkeradmin
+++ pico_with_rfid-rcs522 [2026/09/01 21:53] (current) – [Some test Python Scripts] walkeradmin
@@ Line 92: / Line 92: @@
 ----
 ==== Some test Python Scripts ====
+\\
+<color #ed1c24>*****NOTE THE DRIVER ONLY WORKS WITH 4 BYTE UID TAGS AT THIS TIME, WE ARE LOOKING FOR AN UPDATED DRIVER*****</color>
+\\
 \\
 We will start with two scripts.
@@ Line 218: / Line 221: @@
 \\
 ----
+==== Practical Example ====
+\\
+This is a good example to show what you can do reading RFID tags. Now, I want to make something very, very clear. RFID tags have Unique IDs (UID) and you should be using this UID to ensure that only tags you have authorised can be used on your system. For this example, we are not using UIDs, because it's just a simple example of using an RFID tag to do something.
+\\
+\\
+I am assuming you have read this entire article, if you have not, you will probably have a lot of issues, so I suggest you have a good read to understand the RFID Python scripts.
+\\
+\\
+We are going to create 3 RFID tags. If you look in the previous section above, you can see we have used two Python scripts.
+  * <color #ed1c24>rfid_read.py</color>
+  * <color #ed1c24>rfid_write.py</color>
+Initially, we are going to use the rfid_write.py. Using this Python script, create three RFID tags, RED, AMBER and GREEN.
+\\
+\\
+What we are going to do is to turn on some LEDs depending on which RFID Tag is scanned.
+\\
+\\
+----
+==== The Hardware ====
+\\
+Connect three LEDs, as shown in the diagram below.
+\\
+\\
+{{ :pico-non-wireless-pinout-with-leds-traffic-light-order.png?300 |}}
+\\
+If you used the same GPIO Pins that we used in this example to connect the RFID Reader/Writer, then the pins for the LEDs above will be free.
+\\
+\\
+If you want to plug in the LEDs, then <color #ed1c24>see this wiki page</color> [[traffic_light_leds_using_array|here]] and use the code to test your LEDs (you should see a traffic light sequence).
+\\
+\\
+----
+==== The Python Code ====
+\\
+Below is the Python code we will use for this example, it's an expanded version of the rfid_read.py that we used earlier.
+\\
+\\
+What the code does is very simple.
+Reads the tag.
+Gets the value RED, AMBER or GREEN.
+Uses an if, elseif loop to turn on the corresponding LED (and turn the other off).
+Here is the code, save it to your Pico as rfidled.py.
+<code:python | download>
+from mfrc522 import SimpleMFRC522
+import time
+from machine import Pin
+# Define GPIO pins for the LEDs
+RED = Pin(2, Pin.OUT)
+AMBER = Pin(6, Pin.OUT)
+GREEN = Pin(10, Pin.OUT)
+# Put them in an array
+lights = [RED, AMBER, GREEN]
+# Set the GPIO pins being used
+reader = SimpleMFRC522(spi_id=0,sck=18,miso=16,mosi=19,cs=17,rst=9)
+# Function to turn off all LEDs
+def all_off():
+    for light in lights:
+        light.off()
+# Read the RFID card/tag/sticker
+def read():
+    print("Reading...Please place the card...")  # print a message telling the user to tap the card.
+    id, text = reader.read()   # read in two fields from the tag, id and text.
+    print("ID: %s\nText: %s" % (id,text))   # print the result in Thonny
+#   return id, text
+    return text.strip()  # this returns the contents of 'text' to the calling code, but strips off any crap like spaces.
+                         # Even if the tag is short (red) you still get 16 chars back from the read, so we need to strip of what is not required.
+# Call function 'all_off' to turn off all LEDs
+all_off()
+# Start a loop (forever)
+while True:
+    tag = read() #c all the function def read() and store the result in the varable tag
+    print ("the scanned colour is =", tag)  #print the contents of the variable tag
+    # Ched the read tag colour, turn off all LEDs then turn on the corresponding one. If no tags match, nothing happens.
+    if tag == "RED":
+        all_off()
+        RED.on()
+    elif tag == "AMBER":
+        all_off()
+        AMBER.on()
+    elif tag == "GREEN":
+        all_off()
+        GREEN.on()
+    time.sleep(1) # The delay is to stop the tag being read multiple times per second.
+</code>
+Run the code, if you have wired your LEDs correctly, and programmed your tags, each LED will come on with each Tag scan.
+\\
+\\
+----