Differences

This shows you the differences between two versions of the page.

--- pico_wifi_monitor_with_lcd [2026/08/20 16:10] – [Introduction] walkeradmin
+++ pico_wifi_monitor_with_lcd [2026/08/20 16:49] (current) – [Introduction] walkeradmin
@@ Line 11: / Line 11: @@
 \\
 There are some considerations around this project, and in no particular order, they are:
+\\
+\\
+While we explain everything in great detail, we do assume that you know how to do the following:
+  * Connect to your Pico
+  * Use Thonny
+  * Setup the Pico Firmware
+  * Create and save files on to your Pico
+  * Basic Pico stuff really
+You can find some guides on this site regarding this, or use your favorite search engine to get this info.
   * This is Phase 1. Phase 2 will be a different LCD
@@ Line 16: / Line 27: @@
   * The LCD is a SSD1306 Chip based LCD, we will supply the driver for you.
   * We are using the Pico 2W - A Pico 1 W will also work very well.
+  * Remember, the Pico only supports 2.4Ghz Wifi. So you can't test anything 5Ghz.
   * The Project will contain 3 Main Areas: **(1)** The Wiring and Hardware. **(2)** The Software. **(3)** The Enclosure.
   * Depending on the LCD you use, your UI experience may differ.
@@ Line 38: / Line 50: @@
     *[[Pico Wifi Analyzer - Phase 1]]\\
     *[[Pico Wifi Analyzer - Phase 2 - Coming Soon]]\\
+The good thing about this project really is that at the end of it you have a working Pico and LCD screen with Wifi and I am sure are many of your own projects that you could think of that would utilise this build.
 \\
 \\
 ----