Differences

This shows you the differences between two versions of the page.

--- pico_wifi_analyzer_-_phase_1 [2026/08/20 16:26] – [Introduction] walkeradmin
+++ pico_wifi_analyzer_-_phase_1 [2026/08/25 23:26] (current) – [Introduction] walkeradmin
@@ Line 4: / Line 4: @@
 \\
 {{ :micro-python.png?100 |}}
+\\
+Back to [[pico_wifi_monitor_with_lcd|Pico Wifi Analyzer with LCD]]
 ----
 ===== Introduction =====
 \\
 There is a lot of information on this Wiki about how to build this project, but don't be fooled, it's a very simple project, and it will take you longer to read the Wiki than it will to build the project :)
+\\
+\\
+<color #ed1c24>I recommend you read all the wiki pages for this project first so you don't miss something important or order some parts that will not work.</color>
 \\
 \\
-The project consists of a Raspberry Pi Pico, an LCD Screen, 4 Wires and a pre-written Python script, very simple. The  hardest part of this project will probably be getting a compatible LCD, if you look on Aliexpress, there are hundreds of these LCDs and they cost between £2-£3 each. Buy two in case you break one :)
+The project consists of a Raspberry Pi Pico, an LCD Screen, 4 Wires and a pre-written Python script, very simple. The  hardest part of this project will probably be getting a compatible LCD, if you look on Aliexpress, there are hundreds of these LCDs and they cost between £2-£3 each. Buy two in case you break one :) The LCD I have used is I2C, this is important because the Driver file and the running software are all setup to use I2C.
 \\
 \\
@@ Line 24: / Line 29: @@
 [[Phase 1 - The Wifi Analyzer Software]]\\
 [[Phase 1 - A quick explanation around the UI and Operation]]\\
-[[Phase 1 - The Wifi Analyzer Enlcosure.]]\\
+[[Phase 1 - 3D Printed Enclosure]]\\
 That is it, you should now be all done and have a working Wifi monitor device. Well done :)