Differences

This shows you the differences between two versions of the page.

--- phase_1_-_3d_printed_enclosure [2026/08/25 18:40] – [Introduction] walkeradmin
+++ phase_1_-_3d_printed_enclosure [2026/09/11 07:43] (current) – [Introduction] walkeradmin
@@ Line 18: / Line 18: @@
 {{ :pico-lcd-3dprint-01.jpg?500 |}}
 \\
-I placed the buttons along the top so that the legs of the buttons sat directly over the pins of the buttons, this had two advantages.
+I placed the buttons along the top so that the legs of the buttons sat directly over the pins of the Pico, this had two advantages.
-The wiring is so much simpler
+  * The wiring is so much simpler.
-The buttons hold down the Pico in the case.
+  * The buttons hold down the Pico in the case.
-Now, we just need to solder the four wires between the Pico and the LCD.
+Now, we just need to solder the four wires between the Pico and the LCD, which  you cannot see because they are all hidden behind the Pico/LCD.
 \\
 \\
+So here is the finished item:
 \\
+\\
+{{ :wifianalyzerisometric.jpg?600 |}}
+\\
+Have to be honest here, It looks brilliant, and works so well too. We cannot wait for Phase 2 to be honest :)
+\\
+\\
+----
+==== Download Link ====
+\\
+You can download the STL files from {{ :pico_wifi_analyzer_3d_enclosure_phase_1.zip |Here.}}
+\\
+\\
+----