Differences

This shows you the differences between two versions of the page.

--- gphoto_live_capture [2017/06/25 12:56] – walkeradmin
+++ gphoto_live_capture [2024/10/02 17:25] (current) – removed walkeradmin
@@ Line 1: / Line 1: @@
-===== Live Capture Setup ======
-\\
-<color #ed1c24>IMPORTANT!</color>
-After failing to capture images from four of my cameras, I figured gphoto was not going to help me with anything other than copying files.
-\\
-\\
-<color #ed1c24>However</color>, I discovered this little gem: gphoto2 is configured by default to capture files to your camera's RAM. You need to set it to capture to the SD Card.
-\\
-\\
-Type in the following from the terminal.
-\\
-    gphoto2 --get-config capturetarget
-\\
-You will most likely get the following:
-\\
-\\
-Label: Capture Target
-Type: RADIO
-<color #ed1c24>Current: Internal RAM</color>
-Choice: 0 Internal RAM
-Choice: 1 Memory card
-\\
-\\
-Here we can see that the capture target is set to <color #ed1c24>Current: Internal RAM</color> and we want it to be <color #ed1c24>Memory Card</color>
-\\
-\\
-Enter the following:
-\\
-    gphoto2 --set-config capturetarget=1
-\\
-Now when we check, we should get the following:
-\\
-Label: Capture Target
-Type: RADIO
-<color #ed1c24>Current: Memory card</color>
-Choice: 0 Internal RAM
-Choice: 1 Memory card
-\\
-\\
-Now we are set to record captures to the <color #ed1c24>Memory Card</color>
-\\
-\\