Differences

This shows you the differences between two versions of the page.

--- circuit_and_pcb_layouts [2017/03/09 21:37] – walkeradmin
+++ circuit_and_pcb_layouts [2017/03/27 12:23] (current) – [PCB File] walkeradmin
@@ Line 20: / Line 20: @@
 ----
-==== PCB Layout ====
+==== PCB Layout v3.1 ====
-\\
-<color Red>READ ME FIRST!!!!</color> Before getting any PCBs made, please check the section at the end of this page called **'How to SAVE MONEY on your PCBs'**.
 \\
 \\
@@ Line 65: / Line 63: @@
 ===== Gerber Files =====
 \\
-If you wish to get your own PCBs made, you can use the attached Gerber files {{ :r-pi-ntp-gerber-files.zip |Here}}. However I have not had any made myself yet, so you might want to either wait, or create your own PCB.
+If you wish to get your own PCBs made, you can use the attached Gerber files {{ :pi_ntp_3.1_gerber.zip |Here}}. However I have not had any made myself yet, so you might want to either wait, or create your own PCB.
 \\
 \\
@@ Line 73: / Line 71: @@
 ===== PCB File =====
 \\
-This is the PCB Layout file, produced in software called Sprint Layout v6.0 [[http://www.abacom-online.de/uk/html/sprint-layout.html]]. The PCB file can be downloaded {{ :r-pi-ntp-PCB-File.zip |Here}}.
+This is the PCB Layout file, produced in software called Sprint Layout v6.0 [[http://www.abacom-online.de/uk/html/sprint-layout.html]]. The PCB file can be downloaded {{ :pi_ntp_3.1_pcb.zip |Here}}.
 \\
 \\
@@ Line 79: / Line 77: @@
 \\
 \\
-----
-===== How to SAVE MONEY on your PCBs =====
-\\
-So the PCB files above are perfectly valid. <color red>BUT</color> I noticed something when ordering PCBs from certain manufacturers. The PCB for this project is 65x30mm, I noticed that the price does not change if you go up to 65x95mm (I think up to 100x100mm the price is the same) so you can fit three PCBs on one 'sheet' if you like, thus tripling the number of boards you get for the same price. You will have to cut them yourself, but we are talking about 2 cuts, how hard can that be?
-\\
-\\
-There is a zip file here with three boards in one PCB file, that you can use. It looks slightly different because with the help of a friend the layout has been tidied up a bit, but any of the boards are electrically valid.
-\\
-\\
-Download Triple Board {{ :pintpsinglepcb_x_3.zip |HERE}}.
-\\
-\\
-This is what the PCB looks like.
-\\
-\\
-{{ :r-pi_ntp_clock_all_layers_x3_crop.jpg?800 |}}
-\\
-\\