Differences

This shows you the differences between two versions of the page.

--- basic_intervalometer [2017/06/25 20:16] – walkeradmin
+++ basic_intervalometer [2017/06/25 20:19] (current) – walkeradmin
@@ Line 5: / Line 5: @@
 ----
 \\
-So here is a command line to use <color #ed1c24>gphoto2</color> as a basic intervalometer. You can type this in at the terminal, or you could use a python script to generate this command line based on user input.
+So here is a command line to use <color #22b14c>gphoto2</color> as a basic intervalometer. You can type this in at the terminal, or you could use a python script to generate this command line based on user input.
 \\
 \\
@@ Line 48: / Line 48: @@
 </file>
 \\
-<color #ed1c24>WARNING!!!</color> If you pick a short interval (say 3 or 4 seconds) then the Raspberry Pi may not be able to write the files fast enough, and you can drop frames.
+<color #ed1c24>WARNING!!!</color> If you pick a short interval (say 3 or 4 seconds) then the Raspberry Pi may not be able to write the files fast enough, and you may end up with dropped frames (if you use the --keep switch, they will still be on the camera memory card though).
 \\
 \\
@@ Line 54: / Line 54: @@
 \\
     gphoto2 --interval=3 --frames=10 --capture-image
+\\
+Here you can see the files are captured, but not copied or deleted (you don't have to use the --keep switch if you are not downloading at the same time).
+\\
+<file>
+Time-lapse mode enabled (interval: 3s).
+Capturing frame #1/10...
+Waiting for next capture slot 2 seconds...
+New file is in location /store_00020001/DCIM/100CANON/IMG_5964.CR2 on the camera
+Capturing frame #2/10...
+Waiting for next capture slot 2 seconds...
+New file is in location /store_00020001/DCIM/100CANON/IMG_5965.CR2 on the camera
+Capturing frame #3/10...
+Waiting for next capture slot 2 seconds...
+New file is in location /store_00020001/DCIM/100CANON/IMG_5966.CR2 on the camera
+</file>
 \\
 \\