Differences

This shows you the differences between two versions of the page.

--- add_a_network_interface_without_using_usb [2016/08/27 21:55] – [Testing] walkeradmin
+++ add_a_network_interface_without_using_usb [2017/02/01 16:31] (current) – walkeradmin
@@ Line 36: / Line 36: @@
     n/c                 9          RST
     GND      20         10         GND
-\\
 \\
 ===== Configuration =====
@@ Line 48: / Line 47: @@
     Advanced Options - SPI - Yes to Enable
 \\
-Add the following to your /boot/config.txt
+Add the following to your <color Orange>/boot/config.txt</color>
 \\
     dtoverlay=enc28j60
@@ Line 59: / Line 58: @@
 <color Red>WARNING!!! - </color>I initially got kernel panics when I tested this unit, so using a standard USB nic, you need to do the following:
 \\
-    sudo apt-get upgrade
     sudo apt-get update
+    sudo apt-get upgrade
     sudo rpi-update (this forces a kernel update)
-\\
 \\
 ===== Testing =====
@@ Line 78: / Line 76: @@
 <color orange>3Mb/s Upload</color>\\
 \\
-The best part is that it is super reliable (and cheap)
+The best part is that it is super reliable (and cheap) and we can still use the USB port for something else :)
+\\
+\\
+{{:gpio_spi_nic.jpg?400|}}{{:gpio_spi_nic_2.jpg?400|}}
+\\
 \\