Differences

This shows you the differences between two versions of the page.

--- 2.5_spi_lcd_display [2016/08/08 19:43] – walkeradmin
+++ 2.5_spi_lcd_display [2017/11/10 21:26] (current) – walkeradmin
@@ Line 1: / Line 1: @@
-====== 2.5" SPI LCD Display ======
+====== 3.5" SPI LCD Display ======
 \\
 \\
@@ Line 21: / Line 21: @@
 \\
 . Download the library:
-        The most up to date driver will be here (https://drive.google.com/folderview?id=0B0DYHppEJ9cHbnRzSk9oUVAyMkk&usp=sharing)
+        The most up to date driver will be here:
-Or you can use: {{ :i2c_lcd.zip |}}
+        https://drive.google.com/folderview?id=0B0DYHppEJ9cHbnRzSk9oUVAyMkk&usp=sharing
+Or you can use: {{ :i2c_lcd.zip |}} from here, this worked with Raspbian Jesse.
 \\
 . Unzip the files: tar -xzvf LCD_show_v6_0_2.tar.gz
@@ Line 52: / Line 54: @@
 \\
 \\
+\\
+===== LCD Specs =====
+    TFT features:
+.LCD Type              : TFT Transmissive  ---
+.interface             : spi(32MHZ)
+.Number of Dots        : 320*(RGB)*480  Dots
+.size                  : 86.0*56.2mm
+.Approx. Weight        : TBD  g
+.Back Light            : 6 White LED
+.Touch chip            : xpt2046
+    PIN_NO      SYMBOL        DESCRIPTION
+           3.3v          power output 3.3v
+,4         5v            power output  5v
+           NC            no connect
+          SPI_MISO      SPI Bus Master Input/Slave Output
+,25       GND           Ground
+          SPI_MOSI      SPI Bus Master Output/Slave Input
+          TP_IRQ        The interruption of touch screem,Low  active
+          SPI_CLK       SPI Bus clock
+          TP_CS         The chip selection  for touch  screem,low  active
+          LCD_CS        The chip selection  for LCD  screem,low active
+\\
+\\