WalkerWiki - wiki.alanwalker.uk

User Tools

Site Tools

Trace: • configure_labels • turn_on_led_using_webpage • cron_automation • installing_terraform • multicast_route • traffic_lights
2.5_spi_lcd_display

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
2.5_spi_lcd_display [2016/08/08 19:35] – walkeradmin2.5_spi_lcd_display [2017/11/10 21:26] (current) – walkeradmin
Line 1: Line 1:
-====== 2.5" SPI LCD Display ======+====== 3.5" SPI LCD Display ======
 \\  \\ 
 \\  \\ 
Line 14: Line 14:
 \\  \\ 
 Follow these steps to install the LCD (assuming you have the same model) Follow these steps to install the LCD (assuming you have the same model)
 +\\ 
 +\\ 
 +Here is the model of LCD I am using:
 +\\ 
 +{{:pi_lcd_02.jpg?200|}}
 \\  \\ 
     1. Download the library:     1. Download the library:
-        The most up to date driver will be here (https://drive.google.com/folderview?id=0B0DYHppEJ9cHbnRzSk9oUVAyMkk&usp=sharing)+        The most up to date driver will be here:
                  
-        Or you can use: {{ :i2c_lcd.zip |}}+        https://drive.google.com/folderview?id=0B0DYHppEJ9cHbnRzSk9oUVAyMkk&usp=sharing 
 +         
 +Or you can use: {{ :i2c_lcd.zip |}} from here, this worked with Raspbian Jesse. 
 +\\  
 +    2. Unzip the files: tar -xzvf LCD_show_v6_0_2.tar.gz 
 +     
 +    3. Change the the new directory: cd LCD_show_v6_0_2 
 +     
 +    4. Update System: sudo apt-get update 
 +     
 +    5. Install Driver: sudo ./LCD35_v (Pi will auto reboot) 
 +     
 +    6. If you want to use HDMI then: sudo ./LCD_hdmi 
 +     
 +    7. Run this before Pi Update: sudo apt-mark hold raspberrypi-bootloader   
 +     
 +    8. sudo apt-get update 
 +     
 +    9. sudo apt-get upgrade 
 +\\  
 +==== Note ==== 
 +\\  
 +Everytime I update the system with sudo apt-get upgrade, my LCD stops working and I have to do steps 2-6 again (actually, I don't do step 6 because I have nothing on the HDMI port) 
 +\\  
 +\\  
 +Now you should have a working LCD 
 +\\  
 +\\  
 +{{:pi_lcd_03.jpg?200|}}{{:pi_lcd_04.jpg?200|}} 
 +\\  
 +\\  
 +\\  
 +===== LCD Specs ===== 
 +    TFT features: 
 +     1.LCD Type              : TFT Transmissive  --- 
 +     2.interface             : spi(32MHZ) 
 +     3.Number of Dots        : 320*(RGB)*480  Dots 
 +     4.size                  : 86.0*56.2mm 
 +     5.Approx. Weight        : TBD  g 
 +     6.Back Light            : 6 White LED 
 +     7.Touch chip            : xpt2046 
 +     
 +    PIN_NO      SYMBOL        DESCRIPTION 
 +     1           3.3v          power output 3.3v 
 +     2,4         5v            power output  5v 
 +     3           NC            no connect 
 +     19          SPI_MISO      SPI Bus Master Input/Slave Output 
 +     20,25       GND           Ground 
 +     21          SPI_MOSI      SPI Bus Master Output/Slave Input 
 +     22          TP_IRQ        The interruption of touch screem,Low  active 
 +     23          SPI_CLK       SPI Bus clock 
 +     24          TP_CS         The chip selection  for touch  screem,low  active 
 +     26          LCD_CS        The chip selection  for LCD  screem,low active 
 +\\  
 +\\  
2.5_spi_lcd_display.1470684953.txt.gz · Last modified: (external edit)